-
ADDRESS: Al Raafah - Emirate of Umm Al Quwain
-
CALL US: +971 50 100 0643
info@bioadd-tech.com
PARTICULATE FILTER CLEANER SPRAY
PRODUCT USES
OUR PRODUCT IS SUITABLE FOR ALL CARS WITH A PARTICLE FILTER, PROVIDING CLEANLINESS ON THE VEHICLE WITHOUT REMOVING IT. IT PRESERVES THE ORIGINAL FORMATION OF THE PARTICLE FILTER, SAVING FROM HIGH REPAIR COSTS. REDUCES SOOT AND ASH EMISSION. FIXES ALL CAMSHAFT SYSTEM FAILURES AND POWER LOSS RESULTING FROM SOOT CLOGGAGE AND SMOKE.
USAGE INSTRUCTIONS
APPLY TO A COLD ENGINE. PARTICLE FILTER TEMPERATURE MUST BE 40°C AT MOST. ALWAYS USE THE SPACE BETWEEN
THE CATALYST AND THE PARTICLE FILTER. DO NOT APPLY THIS TO MECHANICALLY DAMAGED OR DISMANTLED FILTERS.
REMOVE THE PARTICLE FILTER HOUSING. EXTEND THE HOSE SPRAYING NOZZLE FROM THE SENSOR HOLE TO THE PARTICLE FILTER WITHOUT BENDING IT. BEWARE OF THE INFILTER OUTSIDE THE SENSOR HOLE. BE CAREFUL NOT TO SPILL IT OUTSIDE THE SENSOR HOLE. IF NECESSARY, EFFUSE INTERMITTENTLY. ASSEMBLE THE TEMPERATURE SENSOR AND DELETE THE CAMSHAFT SYSTEM FAILURE LOGGING ON THE VEHICLE. DRIVE A MINIMUM OF 20 MINUTES IN VARIOUS REVS TO EVACUATE SOOT AND ASH. PLEASE DELETE A NEW FAILURE LOGGING IF IT HAPPENS.
STORAGE & SHELF LIFE
PACKAGES SHOULD BE STORED IN COOL, WELL-VENTILATED, AND COVERED AREAS, AND THEIR TAP SHOULD BE TIGHTLY CLOSED AND SEALED WHEN NOT IN USE.
AMBIENT TEMPERATURE SHOULD NOT EXCEED 60 °C.
WHEN DISPOSING OF THE USED PRODUCT, PHYSICAL AND CHEMICAL PROPERTIES SHOULD BE TAKEN INTO CONSIDERATION.
SHELF LIFE AT LEAST 3 YEARS.
PACKAGING
250 ML , BARREL
TYPICAL CHARACTERISTICS
APPEARANCE
Clear
DENSITY AT 15°C
0.9928-1.011
KINEMATIC VISCOSITY AT 40°C
35
FLASH POINT
>40°C
FREEZING POINT
<-20°C
SOLUBILITY IN WATER
Insoluable
We focus on delivering advanced fuel and chemical solutions that enhance industrial performance and reliability. Our commitment is to provide every client with effective, innovative products and trusted service that strengthen their operations.
GET IN TOUCH
ADDRESS:
Al Raafah Emirate of
Umm Al Quwain. (UAE)
CALL US:
+971 50 100 0643
+971 55 885 9411
+971 4 294 7288
email:
info@bioadd-tech.com
MON - SAT DAY:
10.00 – 18.00
Sunday Closed
We focus on delivering advanced fuel and chemical solutions that enhance industrial performance and reliability. Our commitment is to provide every client with effective, innovative products and trusted service that strengthen their operations.